How to clean thermal paste off motherboard? – Thermal Paste is a calming compound that helps move heat; it takes air holes found mainly between the two areas to operate at high rotations. In a PC system, we set the thermal paste between the CPU and the CPU cooler to ensure that the heat is removed from the processor enough, as can be expected. Without installing thermal paste, your CPU would be very hot and it can be damaged.
Thermal paste is a conductive material used on your CPU to ensure the closest connection between hot CPU and CPU cooler. If you are building a computer, you need thermal paste to ensure your computer’s central processing unit (CPU) is not too hot; Before installing a thermal paste in a new building or an old machine will need first to clean up the previous paste.
Now the problem that people face about How to clean Thermal paste off the motherboard? Some people asked, How do I remove the thermal paste from the CPU and motherboard?
Mr. Motherboard give solutions to all your problems when you read this article carefully. Let’s see what methods we can apply to clean off the thermal paste from Motherboard.
How to clean Thermal paste off motherboard?
Method 1: If you already have a working machine that requires thermal paste to be reapplied, you will need first to clean the old thermal paste. Many people face problems about How to clean old thermal paste off? Before starting, make sure the CPU cooler has been removed, and you can see the thermal paste that is usually white or gray. If you are inserting a thermal paste into a new machine and you do not need to remove the thermal paste first, skip to the next step.
Stage 1: Begin by cleaning the top surface of your CPU with the microfiber material to eliminate as much thermal paste as possible without issue.
Stage 2: Dip the finish of a q-tip into the scouring liquor, then, at that point, use it to wipe the top surface of your CPU tenderly; this will assist with separating any solidified thermal paste. Alternatively, utilize a plastic spudger to assist with eliminating any obstinate glue.
Stage 3: Again, utilize a spotless segment of the microfiber fabric or paper towel to eliminate any leftover thermal paste; the liquor will dissipate very quickly all alone.
Stage 4: Repeat the above method to eliminate any remaining paste that might be adhered to the underside of your CPU cooler.
Method 2: If you want to remove the thermal paste to the CPU or GPU, you will have to use a simple cotton cloth or coffee filter soaked in alcohol rubbing or removing nail polish. Gently wipe the thermal paste away from the processor and be careful not to leave any strands in the processor.
How to apply thermal paste?
Some people do not know how to install thermal paste accurately. Their thermal paste leak on the motherboard. So we will now discuss here how to use thermal paste properly.
When you already have a clean CPU and a cool CPU or have just removed a new one from the box, we can start using the thermal paste. The insertion key sticks to the heat, so you don’t overdo it; you only need to use a small piece of the pea or anything else that may be excessive. Check again to make sure you have all the necessary equipment below, and start the process.
- Clean CPU installed in your motherboard socket
- Clean the cooler CPU ready to install
- Thermal paste
- Microfiber cloth (or paper towel)
Step 1: Since your CPU is already installed on your motherboard, place small pea-sized trash of thermal paste on the CPU.
Step 2: Next, install a cool CPU while applying high pressure on the top of the unit. Note that there is no need to start distributing paste before cool installation; the cold pressure will spread evenly over the thermal glue.
Step 3: Once the cooler has been installed, check the CPU edges to see if there is any excess glue, and, if necessary, wipe with a microfiber cloth or paper towel.
Your thermal paste will last a long time, but be aware of your temperature, if it rises, it could be a sign that thermal paste is drying.